Re: spanning-tree port-priority

I forgot something and hope this doesn't confuse things.... port
priority has to be upstream of root (or blocked) port and is used to
influence the election of the root port on downstream device. HTH
clarify a little more.

Regards,

Marc

On Sun, Dec 9, 2012 at 6:18 AM, marc edwards <renorider_at_gmail.com> wrote:
> It has to be applied on interface upstream of a root port that participates
> in spanning-tree process. It doesn't have to be applied on root bridge to
> work. It is easier to get working on a root bridge because any forwarding
> port on down stream device to root bridge is a root port.
>
> On Dec 9, 2012 3:09 AM, "Mohammad Khalil" <eng_mssk_at_hotmail.com> wrote:
>>
>> Spanning-tree port-priority command is applied on the root bridge , it's a
>> value sent through BPDUs to the other switches
>> If you want to make local effect , use the cost
>>
>> BR,
>> Mohammad
>>
>> > Date: Sun, 9 Dec 2012 10:57:20 +0100
>> > Subject: spanning-tree port-priority
>> > From: benali.amin_at_gmail.com
>> > To: ccielab_at_groupstudy.com
>> >
>> > Hi ,
>> >
>> > Applied the spanning tress port priority command on the router but
>> > seems
>> > it does not take effect : has to be applied on the upstream router . can
>> > someone clarify this ??
>> >
>> > Thanks in advance
>> >
>> >
>> > Amine
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Dec 09 2012 - 07:01:23 ART