Re: Issue in upgrading

Hi,

As per your show running lanbase will be loaded first. Just delete the
command boot system flash
bootflash:cat4500e-lanbase-mz.122-53.SG5.bin and re-add it again. do a
write memory after this.

check the show bootvar to see what is the image that will be loaded.

Regards

On Mon, Nov 12, 2012 at 9:50 PM, Roy Khan <roykhan123_at_hotmail.com> wrote:

> Dear
> I am facing the problem i have the cat4500 and it running the image
> lanbase-mz.122-53.SG5.bin it need to upgrade this image to
> ipbasek9-mz.122-53.SG5.bin now the issue is that
> when i tried to upgrade the image the newer image is not working and it
> still
> show me the old image in show version m i missing something
>
> Router_A#sh running-config | i bootboot-start-markerboot system flash
> bootflash:cat4500e-lanbase-mz.122-53.SG5.binboot system flash
> bootflash:cat4500e-ipbasek9-mz.122-53.SG5.binboot-end-marker
> pls advise
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Nov 12 2012 - 23:10:46 ART