Re: Cisco 2960-S

What's new for the Cisco Catalyst 2960-S Series Switches with LAN Base Software:
 10 and 1 Gigabit Ethernet uplink flexibility with Small Form-Factor
Pluggable Plus (SFP+), providing business continuity and fast
transition to 10 Gigabit Ethernet

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/product_data_sheet0900aecd80322c0c.html

On Fri, Oct 26, 2012 at 11:06 AM, Ryan West <rwest_at_zyedge.com> wrote:
> Yes.
>
> -----Original Message-----
> From: jack daniels [mailto:jckdaniels12_at_gmail.com]
> Sent: Friday, October 26, 2012 1:52 PM
> To: Shaughn Smith
> Cc: Ryan West; Marko Milivojevic; Cisco certification
> Subject: Re: Cisco 2960-S
>
> will GLC-SX-MM be supported on this
>
> On Fri, Oct 26, 2012 at 11:21 PM, jack daniels <jckdaniels12_at_gmail.com> wrote:
>> I saw that -
>>
>> but it says
>>
>> 2 1 Gigabit Ethernet SFP+ uplink ports
>>
>> SFP+ are of capacity more than 5Gbps
>>
>>
>>
>> On Fri, Oct 26, 2012 at 3:23 PM, Shaughn Smith <maniac.smg_at_gmail.com> wrote:
>>> It's easy to check
>>>
>>>
>>> http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/pro
>>> duct_data_sheet0900aecd80322c0c.html
>>>
>>>
>>> 2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP ports
>>>
>>> CCIE # 23962 (SP)
>>>
>>> On Fri, Oct 26, 2012 at 11:30 AM, jack daniels
>>> <jckdaniels12_at_gmail.com>
>>> wrote:
>>>>
>>>> Hi All,
>>>>
>>>> I wrote by mistake wrong product id WS-C2960S-48FPD-L is right one.
>>>>
>>>>
>>>> On Thu, Oct 25, 2012 at 10:49 PM, Ryan West <rwest_at_zyedge.com> wrote:
>>>> > Marko is correct, that's not even a 2960-S.
>>>> >
>>>> > -ryan
>>>> >
>>>> > -----Original Message-----
>>>> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On
>>>> > Behalf Of Marko Milivojevic
>>>> > Sent: Thursday, October 25, 2012 12:24 PM
>>>> > To: jack daniels
>>>> > Cc: Cisco certification
>>>> > Subject: Re: Cisco 2960-S
>>>> >
>>>> > That switch doesn't have any 10G ports.
>>>> >
>>>> > --
>>>> > Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor -
>>>> > IPexpert
>>>> >
>>>> > On Thu, Oct 25, 2012 at 6:52 AM, jack daniels
>>>> > <jckdaniels12_at_gmail.com>
>>>> > wrote:
>>>> >> Hi Experts,
>>>> >>
>>>> >> Please suggest does this switch WS-C2960-48PST-L( Catalyst 2960
>>>> >> 48
>>>> >> 10/100 PoE + 2 1000BT +2 SFP LAN Base Image
>>>> >>
>>>> >> ) - 2 ports which are 10G , can I use these 2 Ports as 1 GBps
>>>> >>
>>>> >>
>>>> >> Regards
>>>> >>
>>>> >>
>>>> >> Blogs and organic groups at http://www.ccie.net
>>>> >>
>>>> >> _________________________________________________________________
>>>> >> _____ _ Subscription information may be found at:
>>>> >> http://www.groupstudy.com/list/CCIELab.html
>>>> >
>>>> >
>>>> > Blogs and organic groups at http://www.ccie.net
>>>> >
>>>> > __________________________________________________________________
>>>> > _____ Subscription information may be found at:
>>>> > http://www.groupstudy.com/list/CCIELab.html
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> ____________________________________________________________________
>>>> ___ Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Oct 26 2012 - 13:08:46 ART