Re: Cisco UCS C200 M2

You need to configure the boot parameter either during the boot procedure or
within the BIOS settings.

Either way, both needs to be configured as well.

does the server have the on board LSI software RAID or is it the LSI
hardware RAID?

Btw I usually use a ISO image through the CIMC works like a charm :-)

Best regards
Martin

Iam Here writes:

> I have Cisco UCS C200 M2 with SAS 15K 450GB . When I put a bootable DVD the Server keeps giving me the following error
>
> PXE-E61: Media test failure, check cable
> PXE-M0F: Exiting Intel Boot Agent
>
> Reboot and select proper boot device
> or insert Boot Media in selected Boot device and press a key
>
>
> I don't have an experience in the server so i need your help .
> Thanks in Advance
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Oct 14 2012 - 22:23:15 ART