RE: Cisco UCS C200 M2

I have Intel ICH10R Controller and it seems that it doesn't support the SAS HardDrive
 
So I have big problem now
What is the difference between the LSI HW/SW Raid ? Could I upgrade the ICH10R to LSI

> From: martin_at_kiefer.dk
> To: go_soon2010_at_hotmail.com
> CC: ccielab_at_groupstudy.com
> Subject: Re: Cisco UCS C200 M2
> Date: Sun, 14 Oct 2012 22:23:15 +0000
>
> You need to configure the boot parameter either during the boot procedure or
> within the BIOS settings.
>
> Either way, both needs to be configured as well.
>
> does the server have the on board LSI software RAID or is it the LSI
> hardware RAID?
>
> Btw I usually use a ISO image through the CIMC works like a charm :-)
>
> Best regards
> Martin
>
> Iam Here writes:
>
> > I have Cisco UCS C200 M2 with SAS 15K 450GB . When I put a bootable DVD the Server keeps giving me the following error
> >
> > PXE-E61: Media test failure, check cable
> > PXE-M0F: Exiting Intel Boot Agent
> >
> > Reboot and select proper boot device
> > or insert Boot Media in selected Boot device and press a key
> >
> >
> > I don't have an experience in the server so i need your help .
> > Thanks in Advance
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Oct 15 2012 - 14:01:55 ART