Re: Cisco ISE 3315 Appliance Basic configuration

Hello Sadiq,

Thanks for your reply.

It was not giving any reply to ARP request. I tried to install a new device
and checked with the same configs and its working fine. Raised a case with
TAC.

Regards,
Viki

On Tue, Jul 10, 2012 at 10:29 PM, Sadiq Yakasai <sadiqtanko_at_gmail.com>wrote:

> Hi Vignesh,
>
> How about the arp table on the ISE? Can the ISE ping other devices on the
> same VLAN?
>
> Can we see some configuration please?
>
> On Tue, Jul 10, 2012 at 10:27 AM, Vignesh Sethuraman <
> sethuvignesh_at_gmail.com> wrote:
>
>> Hello Experts,
>>
>> I have configured cisco 3315 appliance with basic configuration like
>> hostname, IP address, Gateway, domain, NTP server, admin login
>> credentials etc for the first time. After the basic configuration,
>> appliance rebooted and when it came up, it was not able to reach the
>> default gateway.
>>
>> I tried to ping its own ethernet 0 interface it is working fine. I
>> connected a laptop on the switchport to see if any issue with the
>> switch but switchport is working fine. I replaced the cable and
>> checked it still no luck.
>>
>> I could see all the process are running by issuing the command
>> "show application status ise".
>>
>> Please let me know what I am missing
>>
>> Thanks,
>> Vignesh
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> CCIEx2 (R&S|Sec) #19963

Blogs and organic groups at http://www.ccie.net
Received on Wed Jul 11 2012 - 20:10:50 ART