TAC should be able to sort that out then! Good luck!
Sadiq
On Wed, Jul 11, 2012 at 7:10 PM, Vignesh Sethuraman
<sethuvignesh_at_gmail.com>wrote:
> Hello Sadiq,
>
> Thanks for your reply.
>
> It was not giving any reply to ARP request. I tried to install a new
> device and checked with the same configs and its working fine. Raised a
> case with TAC.
>
> Regards,
> Viki
>
>
> On Tue, Jul 10, 2012 at 10:29 PM, Sadiq Yakasai <sadiqtanko_at_gmail.com>wrote:
>
>> Hi Vignesh,
>>
>> How about the arp table on the ISE? Can the ISE ping other devices on the
>> same VLAN?
>>
>> Can we see some configuration please?
>>
>> On Tue, Jul 10, 2012 at 10:27 AM, Vignesh Sethuraman <
>> sethuvignesh_at_gmail.com> wrote:
>>
>>> Hello Experts,
>>>
>>> I have configured cisco 3315 appliance with basic configuration like
>>> hostname, IP address, Gateway, domain, NTP server, admin login
>>> credentials etc for the first time. After the basic configuration,
>>> appliance rebooted and when it came up, it was not able to reach the
>>> default gateway.
>>>
>>> I tried to ping its own ethernet 0 interface it is working fine. I
>>> connected a laptop on the switchport to see if any issue with the
>>> switch but switchport is working fine. I replaced the cable and
>>> checked it still no luck.
>>>
>>> I could see all the process are running by issuing the command
>>> "show application status ise".
>>>
>>> Please let me know what I am missing
>>>
>>> Thanks,
>>> Vignesh
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>> --
>> CCIEx2 (R&S|Sec) #19963
>>
>
>
-- CCIEx2 (R&S|Sec) #19963 Blogs and organic groups at http://www.ccie.netReceived on Wed Jul 11 2012 - 19:15:49 ART
This archive was generated by hypermail 2.2.0 : Wed Aug 01 2012 - 15:55:23 ART