Thanks Leigh, could not find a config guide under 12.4 mainline will check it out, prior under a non stub router got it working perfect after interface summary.
-- BR Sent from my iPhone on 3 On 11 Jul 2012, at 02:05, "Leigh Finch" <leigh_at_leighfinch.net> wrote: > Hi Tony, > As far as I can tell from the DOC-CD and my own testing, the leak-map only > applies to routes learned via EIGRP. As soon as you apply a leak-map to an > EIGRP stub you need to explicitly allow connected, static, redistributed > routes if you want those. > > I think you are looking for something more like. > > eigrp 500 > redistribute connected route-map LEAK metric 1 1 1 1 1 > network 70.1.1.0 0.0.0.3 > no auto-summary > eigrp stub redistributed > > leigh > >> Any secret to using these maps on a stub area to leak two routes out? >> >> Here's my config.. >> >> R1>R2 10mbps fe 70.1.1.0/30 >> >> >> R2 >> >> Loopbacks >> 80.1.2.1 >> 80.1.3.1 >> >> access-list 7 permit 80.1.0.0 0.0.3.255 >> route-map LEAK >> match ip address 7 >> >> eigrp 500 >> network 70.1.1.0 0.0.0.3 >> no auto-summary >> eigrp stub leak-map LEAK >> >> I'm not seeing the routes on R1- go on point it out.. >> >> -- >> BR >> >> Tony >> >> Sent from my iPad >> >> >> Blogs and organic groups at http://www.ccie.net >> >> _______________________________________________________________________ >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html Blogs and organic groups at http://www.ccie.netReceived on Wed Jul 11 2012 - 06:24:18 ART
This archive was generated by hypermail 2.2.0 : Wed Aug 01 2012 - 15:55:23 ART