Re: EIGRP stub leak-map

Hi Tony,
As far as I can tell from the DOC-CD and my own testing, the leak-map only
applies to routes learned via EIGRP. As soon as you apply a leak-map to an
EIGRP stub you need to explicitly allow connected, static, redistributed
routes if you want those.

I think you are looking for something more like.

eigrp 500
redistribute connected route-map LEAK metric 1 1 1 1 1
network 70.1.1.0 0.0.0.3
no auto-summary
eigrp stub redistributed

leigh

> Any secret to using these maps on a stub area to leak two routes out?
>
> Here's my config..
>
> R1>R2 10mbps fe 70.1.1.0/30
>
>
> R2
>
> Loopbacks
> 80.1.2.1
> 80.1.3.1
>
> access-list 7 permit 80.1.0.0 0.0.3.255
> route-map LEAK
> match ip address 7
>
> eigrp 500
> network 70.1.1.0 0.0.0.3
> no auto-summary
> eigrp stub leak-map LEAK
>
> I'm not seeing the routes on R1- go on point it out..
>
> --
> BR
>
> Tony
>
> Sent from my iPad
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Jul 11 2012 - 11:05:01 ART