Re: blocking international calls on CME using SIP trunk

Dear Carlos,

Here are the configurations related to COR.

dial-peer cor custom
 name int-call
 name mob-call

!
!
dial-peer cor list user
 member int-call
 member mob-call

dial-peer voice 101 voip
 corlist outgoing user
 description ** Outgoing Calls over SIP Trunk >> **
 translation-profile outgoing outbound-tr
 destination-pattern 05........
 session protocol sipv2
 session target ipv4:10.200.7.157
 voice-class sip dtmf-relay force rtp-nte
 dtmf-relay rtp-nte
 codec g711alaw
 no vad
!

ephone-dn 2 octo-line
 number 4960
 description Asim
 name Asim
 corlist incoming user
 corlist outgoing user
 hold-alert 30 originator

On Thu, Jul 5, 2012 at 12:59 PM, Carlos G Mendioroz <tron_at_huapi.ba.ar>wrote:

> Then, it seems, you did not do it right :)
>
> Would you post your config and dialplan specifics so anyone willing can
> give you some help ?
>
> -Carlos
>
> Asim Zafar @ 04/07/2012 21:15 -0300 dixit:
>
> Dear Experts,
>>
>> Any one can help how can i block international dialing for some extensions
>> in Cisco CME ver 8.6, I configured COR but it is not working.
>>
>>
> --
> Carlos G Mendioroz <tron_at_huapi.ba.ar> LW7 EQI Argentina
>
>
>

-- 
Thanks & Regards,
Asim Zafar
Blogs and organic groups at http://www.ccie.net