Re: blocking international calls on CME using SIP trunk

There is only one dial-peer there, so either all can dial it or all can not.
There is only one cor list, so only one kind of users and/or destinations.

I can not find your dial-plan description.

If you want some help, please be nice and do your homework :)

-Carlos

Asim Zafar @ 05/07/2012 21:14 -0300 dixit:
> Dear Carlos,
>
>
> Here are the configurations related to COR.
>
>
>
> dial-peer cor custom
> name int-call
> name mob-call
>
> !
> !
> dial-peer cor list user
> member int-call
> member mob-call
>
>
> dial-peer voice 101 voip
> corlist outgoing user
> description ** Outgoing Calls over SIP Trunk >> **
> translation-profile outgoing outbound-tr
> destination-pattern 05........
> session protocol sipv2
> session target ipv4:10.200.7.157
> voice-class sip dtmf-relay force rtp-nte
> dtmf-relay rtp-nte
> codec g711alaw
> no vad
> !
>
> ephone-dn 2 octo-line
> number 4960
> description Asim
> name Asim
> corlist incoming user
> corlist outgoing user
> hold-alert 30 originator
>
>
>
> On Thu, Jul 5, 2012 at 12:59 PM, Carlos G Mendioroz <tron_at_huapi.ba.ar
> <mailto:tron_at_huapi.ba.ar>> wrote:
>
> Then, it seems, you did not do it right :)
>
> Would you post your config and dialplan specifics so anyone
> willing can give you some help ?
>
> -Carlos
>
> Asim Zafar @ 04/07/2012 21:15 -0300 dixit:
>
> Dear Experts,
>
> Any one can help how can i block international dialing for
> some extensions
> in Cisco CME ver 8.6, I configured COR but it is not working.
>
>
> --
> Carlos G Mendioroz <tron_at_huapi.ba.ar <mailto:tron_at_huapi.ba.ar>>
> LW7 EQI Argentina
>
>
>
>
>
> --
> Thanks & Regards,
>
> Asim Zafar

-- 
Carlos G Mendioroz  <tron_at_huapi.ba.ar>  LW7 EQI  Argentina
Blogs and organic groups at http://www.ccie.net