Re: Physical difference between Wic2t DCE/DTE

Thanks
Rob

On Tue, Jul 3, 2012 at 2:12 PM, Adam Booth <adam.booth_at_gmail.com> wrote:

> Hi Rob,
>
> With the smart serial cable, if I recall correctly certain pins are
> shorted out facing the router and this is how the controller can determine
> the serial interface type RS-232, V.35, X.21 and the gender (the knowledge
> is within the cable itself)
>
> Cheers,
> Adam
>
> On Tue, Jul 3, 2012 at 5:06 PM, me you <anunda19_at_gmail.com> wrote:
>
>> Lab cable are the smart serial back to back connections for Wic2t. What
>> are
>> the difference and how does the router know if the DCE or DTE end is
>> connected? I just want to understand how the router is getting the
>> information for show controllers.
>>
>> Thanks
>> Rob
>>
>>
>> Tried to find a pint out for Wic2t back 2 back cables, but I was unable
>> to.
>> The other standards all have different pinouts depending on the standard.
>>
>> http://www.cisco.com/en/US/docs/wireless/mwr_1941/hardware_install/1941_hardware_install/guide/cablspec.html#wp9427
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Jul 03 2012 - 14:18:53 ART