Re: QOS question

Hi Guys,
                                                         Could any one help me on this? I know it's ugly long question.
                                                           Sent from my iPhone

On Jun 26, 2012, at 11:50 PM, mohd-mousa_at_hotmail.com wrote:

> Hi Guys I Faced this question :
>
> Configure queue for traffic flowing over serial.. Ftp traffic use 20%
>
> HTTP traffic use 20%
> IPV6 traffic use 25%
> TELNET traffic use 15%
>
>
> The answer i saw, they conifgure PQ but don't know how they put byte-count
>
>
>
> FTP 20% = 2000 byte-count
> HTTP 20% = 2000
> IPV6 25% = 2500
> TELNET 15% they mention because the packet size is small, we should increase
> the queue limit !
>
>
> The answer like this:
> Queue 1 byte-count 2000
> queue 2 byte-count 2000
> queue 3 byte-count 2500
> queue 5 byte-count 2000 ------ this is for default traffic
> queue 4 limit 50 -------- this is for telnet My questions are:20% HTTP
>
> 20% FTP
> 25% IPV6
> 15% Telnet
> 20% default
>
>
> -I know that by default 75% we can reserve for QOS ( but its tewakable), should
> we put it 100% in this
> example ?
>
> max-reserve band 100
>
>
> -Is there difference between the packet size of the type of traffic (telnet
> traffic) ? 1500 the packet size by default, right ?
>
>
> -If i need to do it by MQC/CBWFQ
> in the map-class, can we put for http class for example
> bandwidth percent 20 OR bandwidth (20% * interface bandwidth) ?
>
>
> Any answer will be highly appreciated guys,sorry for this long question !!
> Thanks in advance :))
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Jun 28 2012 - 15:32:53 ART