QOS question

Hi Guys I Faced this question :

Configure queue for traffic flowing over serial.. Ftp traffic use 20%

HTTP traffic use 20%
IPV6 traffic use 25%
TELNET traffic use 15%

The answer i saw, they conifgure PQ but don't know how they put byte-count

FTP 20% = 2000 byte-count
HTTP 20% = 2000
IPV6 25% = 2500
TELNET 15% they mention because the packet size is small, we should increase
the queue limit !

The answer like this:
Queue 1 byte-count 2000
queue 2 byte-count 2000
queue 3 byte-count 2500
queue 5 byte-count 2000 ------ this is for default traffic
queue 4 limit 50 -------- this is for telnet My questions are:20% HTTP

20% FTP
25% IPV6
15% Telnet
20% default

-I know that by default 75% we can reserve for QOS ( but its tewakable), should
we put it 100% in this
example ?

max-reserve band 100

-Is there difference between the packet size of the type of traffic (telnet
traffic) ? 1500 the packet size by default, right ?

-If i need to do it by MQC/CBWFQ
in the map-class, can we put for http class for example
bandwidth percent 20 OR bandwidth (20% * interface bandwidth) ?

Any answer will be highly appreciated guys,sorry for this long question !!
Thanks in advance :))

Blogs and organic groups at http://www.ccie.net
Received on Tue Jun 26 2012 - 16:36:19 ART