Re: Passive inteface on RIP

Router rip
Distribute-list in f0/1 (acl)

Acl is your routing that you want to filter

Aris
Sent from my HTC

----- Reply message -----
From: "Ahmed Wael" <ahmed_wael_at_efinance.com.eg>
To: "ccielab_at_groupstudy.com" <ccielab_at_groupstudy.com>
Subject: Passive inteface on RIP
Date: Thu, Jun 21, 2012 6:49 PM

Dears,

I configured the following on R1:

Int lo0
Ip add 1.1.2.1 255.255.255.0
!
Int f 0/0
Ip add 1.1.1.1 255.255.255.0
!
Int f 0/1
Ip add 1.1.3.1 255.255.255.0
!
Router rip
ver 2
no auto
network 1.0.0.0
passive-interface default
neighbor 1.1.1.2
!

This neighbor is with R2. I found that lo0 and fast 0/1 interfaces in the
routing table of R2.

How can I prevent R1 from sending lo0 and fast 0/1 to R2?

Thanks & Best regards

Ahmed Wael
IT Communications Engineer

Blogs and organic groups at http://www.ccie.net
Received on Thu Jun 21 2012 - 20:16:36 ART