Re: dynamips c3640 trunk problem nm-16esw

Hi Ivan,

Any router with 2 nm-15esw module doesn't work with gns3. It works with
only single Nm-15esw module. I have also tried it multiple times before
.But it doesn't work. It is a bug in GNS3. It doesn't support 2 esw module.

and yes you are right, configution will be fine, trunk links and access
ports links will be fine , But you will not be able to ping .

Try connecting only single module , it will work 100%.

Regards,
Shekhar

On Thu, May 17, 2012 at 4:10 AM, Ivan Hrvatska <ivanzghr_at_gmail.com> wrote:

> Hi,
>
> I'm using c3640 with nm-16esw in dynamips as cat switch. If I have two
> 16esw modules in every 3640, one module has connected routers and the other
> is used for interconnection between switches. Problem is that R1, connected
> to Cat2, cannot ping BB1, connected to Cat1. Between switches dot1q trunk.
> Even configuration is good, ping failes. Same thing with c3725.
> When I use just one nm-16esw, where trunk between switches is together with
> connected routers on the same module, it works fine. Is there any catch
> with 2 modules since it doesn't not work? Thanks for help.
>
> Regards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu May 17 2012 - 09:34:11 ART