Re: Cisco 1841

I hate to ask again, but is there a network diagram of this to better explain?
 
The hardware platform would only facilitate speed, options, and hardware
WIC's.
 
From there, we can better assist.

Regards,
Jay McMickle- CCIE
#35355
 

________________________________
From: Lucky
<iamreallylucky_at_gmail.com>
To: Jay McMickle <jay.mcmickle_at_yahoo.com>
Cc:
"ccielab_at_groupstudy.com" <ccielab_at_groupstudy.com>
Sent: Friday, May 4, 2012
5:02 AM
Subject: Re: Cisco 1841

After a long I am reply for this, since the
need has arised to sort out
this ...

need help on this

OPtion 1 -

I am
thinking to have additional HWIC slot for the router and configure it
so that
from router 1 interface for wan link, 2 interface for lan - (from
which 1
interface will go to one firewall for one tunnel) - from 2nd lan
interface
will go to second firewall for second tunnel.

OPtion 2

I should upgrade...
an 1841 by getting - 3900 series router and do the
consiguration

once i get
the card and insert I need help in the configuration changes -

what i need to
do inorder to configure adsl router so that from router 1
interface for wan
link, 2 interface for lan - (from which 1 interface will
go to one firewall
for one tunnel) - from 2nd lan interface will go to
second firewall for second
tunnel.

Total 16 wan ips i have.

I Need help on a sample configuration - on
how this can be achieved.

On Wed, Apr 4, 2012 at 9:07 PM, Jay McMickle
<jay.mcmickle_at_yahoo.com> wrote:

> So, the CP FW is the outer facing edge,
where the NAT occurs, and the 1841
> is the VPN termination point?
>
>
>
Regards,
> Jay McMickle- CCNP,CCSP,CCDP
> Sent from iJay
>
> On Apr 3, 2012,
at 11:47 PM, Lucky <iamreallylucky_at_gmail.com> wrote:
>
> Thanks jay,
> to be
more precise ,
> currently two ports in 1841 are already used for nat inside
and outside
> and it gets terminated at production network through checkpoint
firewall -
> this has an existing tunnel to london. I want to create another
tunnel to
> london without disturbing the existing network and put another
port in 1841.
>
> in the 1841 i want to insert another card with ethernet
port, configure
> so that i can connect to another firewal and create my
tunnel- is this
> possible
> is it possible for the 1841 to handle this
>
right now only two ports are there in 1841 and already used for nat
> inside,
outside , so the above scenarios is possible.
> thanks
> lucky
>
>
> On Wed,
Apr 4, 2012 at 12:11 PM, Jay McMickle <jay.mcmickle_at_yahoo.com>wrote:
>
>> Are
you stating that you want to stand up another L2L tunnel, with a
>> separate
IP (from the same /28 block) on the outside Interface of the 1841?
>> You
might be able to use ip add x x secondary, but I don't know that it
>> would
work, and could get messy. Now, you mentioned a checkpoint device, so
>> I'm
assuming maybe you have a checkpoint device on the inside? Could you
>> NAT
from the outside to the inside to the checkpoint and terminate your VPN
>>
there?
>>
>> Sorry of I missed the context of your question.
>>
>> Regards,
>>
Jay McMickle- CCNP,CCSP,CCDP
>> Sent from iJay
>>
>> On Apr 3, 2012, at 10:31
PM, Lucky <iamreallylucky_at_gmail.com> wrote:
>>
>> > Hi expert guys,
>> >
>> >
i am using cisco 1841 which is terminated from - fiber link 22mbps
>> >
connection in singapore .
>> >
>> > I have 16 free ip for this line. right
there is only two ethernet
>> interface
>> > used for in and out.
>> >
>> >
>>
> from my network vpn is created to another location in london , now i
>> want
>> > to create another vpn connection using another ip and isloated few users
>> > through another
>> > firewall (checkpoint).
>> >
>> > is this possible
with single link termination from one router nat
>> outside
>> > and two ports
for nat inside with the other ips.
>> >
>> > thanks
>> > lucky
>> >
>> >
>> >
Blogs and organic groups at http://www.ccie.net
>> >
>> >
Received on Fri May 04 2012 - 08:12:26 ART