RE: redistribute connected

Hi Marc,
When you redistribution the route will do 2 things for you, its go into
routing table and check the routes for example if rip into ospf the routers
check the ospf routes e.g show ip route ospfand then it check what are the
connected interface that running the ospf it create the route-map internal
that you cannot see for example if eth0 and ser1/0 is running ospf.it create
the route-map like that,
route-map permit 10match interface e0 s1/0
but when you specify the route-map with connected you break the router that
is doing for you, I highly recommend you to see the INE 4.5 ( Not sure ) Great
Brain dennis explain it very very well.
thanks
Roy

> Date: Sun, 22 Apr 2012 11:54:35 -0700
> Subject: redistribute connected
> From: renorider_at_gmail.com
> To: ccielab_at_groupstudy.com
>
> Experts,
>
> I have read about this but I need some clarity. If I attach route-map to
> redistribute connected in a routing process, will this limit what
> is redistributed when also redistributing other igps under that routing
> process? What if I match on interface and not on IP address?
>
>
> Much thanks,
>
> Marc
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Apr 23 2012 - 01:15:09 ART