RE: Hunt group but the final number is located in another site

It sounds like you are missing the following command on R1:

R1(config)#voice ser voip
R1(conf-voi-serv)#allow-c h to h

The inbound call leg is H323 and when the final destination number is invoked the outbound leg is also H323 and you need to explicitly allow this on the gateway that has the hunt group configured.

Vik Malhi  CCIE #13890
Managing Partner - IPexpert, Inc.

Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130
Mailto: vmalhi_at_ipexpert.com

> On Apr 4, 2012, at 3:28 PM, Iam Here wrote:The customer has site-1 with hunt group (pilot 1000 and list 1100,1101 and the final number is 4501) but the final number is in another site (Site-2)when i make a call to 1000 it goes first to 1100 then 1101 but it gives busy tone when it should dial 4501 )We can access 4501 through voip dial peer Should i use another method other than the hunt group to fulfill that or what ?
> I tried exp-num and also to
> create ephone-dn with forward to 4501 but still gives me Busy tone

Blogs and organic groups at http://www.ccie.net
Received on Wed Apr 04 2012 - 20:58:28 ART