Re: gns3

Good Morning Brian,

Are you able to run IPV6 over EIGRP with this image?
For example the following command under an interface:
ipv6 eigrp 1
or to enable IPV6 with EIGRP in Global config:
ipv6 router eigrp 1

I have a similar image but cannot.

Also are you able to configure the following commands with MPLS?
address-family vpnv4
mpls ip

again I cannot run these commands with image I have.

Regards,
John

On 3/16/12, Brian Dennis <bdennis_at_ine.com> wrote:
> R3#sho ver
> Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9_IVS-M), Version
> 12.4(15)T13, RELEASE SOFTWARE (fc3)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2010 by Cisco Systems, Inc.
> Compiled Wed 07-Apr-10 12:44 by prod_rel_team
>
> R6#sho ver
> Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version
> 12.4(24)T3, RELEASE SOFTWARE (fc2)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2010 by Cisco Systems, Inc.
> Compiled Tue 23-Mar-10 13:16 by prod_rel_team
>
> brian_at_CCIE2210 ~ $ ./dynamips-0.2.8-RC3-community-x86_64.bin
> Cisco Router Simulation Platform (version 0.2.8-RC3-amd64/Linux stable)
> Copyright (c) 2005-2011 Christophe Fillot.
> Build date: Nov 12 2011 18:42:02
>
> brian_at_CCIE2210 ~ $ lshw -class processor
> *-cpu
> description: CPU
> product: Intel(R) Core(TM) i7-2960XM CPU @ 2.70GHz
> vendor: Intel Corp.
> physical id: 1
> bus info: cpu_at_0
> version: Intel(R) Core(TM) i7-2960XM CPU @ 2.70GHz
> serial: Not Supported by CPU
> slot: CPU
> size: 1800MHz
> capacity: 1800MHz
> width: 64 bits
> clock: 100MHz
> capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae
> mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr
> sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs
> bts nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor
> ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt
> aes xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi
> flexpriority ept vpid cpufreq
> configuration: cores=4 enabledcores=4 threads=8
>
> brian_at_CCIE2210 ~ $ uname -a
> Linux CCIE2210 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC
> 2011 x86_64 x86_64 x86_64 GNU/Linux
>
> --
> Brian Dennis, CCIEx5 #2210 (R&S/ISP-Dial/Security/SP/Voice)
> bdennis_at_ine.com
>
> Internetwork Expert, Inc.
> http://www.INE.com
>
>
> On 03/15/2012 09:59 PM, Nish Vamadevan wrote:
>> hi Brian,
>>
>> Which ios version do you use, the exact code?
>>
>> Cheers!
>>
>> Sent from my BlackBerry. wireless device
>>
>> -----Original Message-----
>> From: Brian Dennis<bdennis_at_ine.com>
>> Sender: nobody_at_groupstudy.com
>> Date: Thu, 15 Mar 2012 21:41:04
>> To:<ccielab_at_groupstudy.com>
>> Reply-To: Brian Dennis<bdennis_at_ine.com>
>> Subject: Re: gns3
>>
>> I use GNS3 on Mint 12 (Lenovo W520) with an Intel Core i7-2920X and 16GB
>> of RAM. This can easily run 10 routers and not break above 15 or 20%
>> CPU once the idle-pc is configured. No matter what hardware you use,
>> the idle-pc value is key.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Mar 21 2012 - 08:47:37 ART