I've found that in certain IOS images based on the 3700 and 3600 devices cisco removed the EIGRP IPv6 support in the 12.4 images I had. I needed to jump down to a 12.3 image to get the EIGRP IPv6 functionality back. One of the primary reasons that I just purchase the 2800 aeries devices and opened lab'd all my old equipment.
Regards,
Joe Sanchez
On Mar 21, 2012, at 7:47 AM, john matijevic <john.matijevic_at_gmail.com> wrote:
> Good Morning Brian,
>
> Are you able to run IPV6 over EIGRP with this image?
> For example the following command under an interface:
> ipv6 eigrp 1
> or to enable IPV6 with EIGRP in Global config:
> ipv6 router eigrp 1
>
>
> I have a similar image but cannot.
>
> Also are you able to configure the following commands with MPLS?
> address-family vpnv4
> mpls ip
>
> again I cannot run these commands with image I have.
>
>
>
>
>
> Regards,
> John
>
> On 3/16/12, Brian Dennis <bdennis_at_ine.com> wrote:
>> R3#sho ver
>> Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9_IVS-M), Version
>> 12.4(15)T13, RELEASE SOFTWARE (fc3)
>> Technical Support: http://www.cisco.com/techsupport
>> Copyright (c) 1986-2010 by Cisco Systems, Inc.
>> Compiled Wed 07-Apr-10 12:44 by prod_rel_team
>>
>> R6#sho ver
>> Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version
>> 12.4(24)T3, RELEASE SOFTWARE (fc2)
>> Technical Support: http://www.cisco.com/techsupport
>> Copyright (c) 1986-2010 by Cisco Systems, Inc.
>> Compiled Tue 23-Mar-10 13:16 by prod_rel_team
>>
>> brian_at_CCIE2210 ~ $ ./dynamips-0.2.8-RC3-community-x86_64.bin
>> Cisco Router Simulation Platform (version 0.2.8-RC3-amd64/Linux stable)
>> Copyright (c) 2005-2011 Christophe Fillot.
>> Build date: Nov 12 2011 18:42:02
>>
>> brian_at_CCIE2210 ~ $ lshw -class processor
>> *-cpu
>> description: CPU
>> product: Intel(R) Core(TM) i7-2960XM CPU @ 2.70GHz
>> vendor: Intel Corp.
>> physical id: 1
>> bus info: cpu_at_0
>> version: Intel(R) Core(TM) i7-2960XM CPU @ 2.70GHz
>> serial: Not Supported by CPU
>> slot: CPU
>> size: 1800MHz
>> capacity: 1800MHz
>> width: 64 bits
>> clock: 100MHz
>> capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae
>> mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr
>> sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs
>> bts nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor
>> ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt
>> aes xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi
>> flexpriority ept vpid cpufreq
>> configuration: cores=4 enabledcores=4 threads=8
>>
>> brian_at_CCIE2210 ~ $ uname -a
>> Linux CCIE2210 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC
>> 2011 x86_64 x86_64 x86_64 GNU/Linux
>>
>> --
>> Brian Dennis, CCIEx5 #2210 (R&S/ISP-Dial/Security/SP/Voice)
>> bdennis_at_ine.com
>>
>> Internetwork Expert, Inc.
>> http://www.INE.com
>>
>>
>> On 03/15/2012 09:59 PM, Nish Vamadevan wrote:
>>> hi Brian,
>>>
>>> Which ios version do you use, the exact code?
>>>
>>> Cheers!
>>>
>>> Sent from my BlackBerry. wireless device
>>>
>>> -----Original Message-----
>>> From: Brian Dennis<bdennis_at_ine.com>
>>> Sender: nobody_at_groupstudy.com
>>> Date: Thu, 15 Mar 2012 21:41:04
>>> To:<ccielab_at_groupstudy.com>
>>> Reply-To: Brian Dennis<bdennis_at_ine.com>
>>> Subject: Re: gns3
>>>
>>> I use GNS3 on Mint 12 (Lenovo W520) with an Intel Core i7-2920X and 16GB
>>> of RAM. This can easily run 10 routers and not break above 15 or 20%
>>> CPU once the idle-pc is configured. No matter what hardware you use,
>>> the idle-pc value is key.
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Wed Mar 21 2012 - 08:50:47 ART
This archive was generated by hypermail 2.2.0 : Sun Apr 01 2012 - 07:56:52 ART