Re: Understanding questions. W/O reading into them

Hi Israel,

Is CBQoS is considered part of GTS?

Cheers,
Adam

On Tue, Mar 13, 2012 at 8:32 PM, Israel Ogongo <ohio38jr_at_gmail.com> wrote:

> I know you can set percentage on the bandwidth using this command:
> e.g. once you've created your class map and prioritized it...
>
> Router(config)#class-map TEST_MAP
> Router(config-cmap)#match any
> Router(config-cmap)#exit
> Router(config)#policy-map TEST
> Router(config-pmap)#class TEST_MAP
> Router(config-pmap-c)#bandwidth ?
> <8-2000000> Kilo Bits per second
> percent % of total Bandwidth
> remaining % of the remaining bandwidth
>
>
> You can set it in percent of the total bandwidth..(Just want to emphasize
> the use of bandwidth percentage)
>
> Go through the example above and see if you can fit it into your question.
> I hope that helps.
>
> Thank you,
> I
>
> On Tue, Mar 13, 2012 at 8:37 AM, Yuri Bank <yuribank_at_gmail.com> wrote:
>
> > It seems straight forward enough
> >
> > access-list 100 permit icmp any any
> > access-list 100 permit tcp any any eq telnet
> > access-list 101 permit tcp any any eq ftp
> > access-list 101 permit tcp any any eq ftp-data
> > access-list 102 permit ip any any
> >
> > traffic-shape group 100 9600 8000 0
> > traffic-shape group 101 32000 8000 0
> > traffic-shape group 102 22400 8000 0
> >
> >
> > On Sun, Mar 11, 2012 at 6:04 PM, Joe Sanchez <marco207p_at_gmail.com>
> wrote:
> >
> > > All,
> > >
> > > I have issues reading into questions and making them more difficult
> then
> > > the questions should be. Let me test those of you and see what you
> think
> > > about this question?
> > >
> > >
> > > *Configure GTS for Frame-relay networking on sub0interface S0/0/0.24 on
> > R4.
> > > configure the bandwidth for interface S0/0/0.24 to be 64Kbps.
> Classify
> > > traffic according to the following policy:*
> > > *
> > > *
> > > ** Telnet and ICMP traffic is shaped to 15% of the bandwidth*
> > > ** FTP traffic is 50% of the bandwidth after shaping*
> > > ** All other traffic gets the remaining 35% of the bandwidth*
> > > ** No excess bursts should be allowed*
> > > ** Use WFQ*
> > > *
> > > *
> > > *" what are your traffic shaping values for each of the above groups?*
> > > *
> > > *
> > > *
> > > *
> > > *JOE SANCHEZ*
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Mar 13 2012 - 21:38:37 ART