Re: MQC and 6509

6748's have more supportablilty. but honestly anything labled 'Catalyst'
won't perform MQC as it is intended. Most Catalyst do hardware based QoS
using the dscp/CoS mappings, queuing, and thresholds. I have joked in the
past that doing MQC on Catalyst is like pounding a square peg into a round
hole. Save the frustration and do L2 QoS on Catalyst. I am sure there will
be some other opinions but mine comes with years of experience on this...

hth

Marc

On Wed, Mar 7, 2012 at 8:00 AM, Ccieyarub <ccieyarub_at_gmail.com> wrote:

> Dear All,
>
> Quick one , in the 6509 when we apply a QOS on an interface it applies the
> QOS
> policy automatically in all the blades of that interface, is there a reason
> for that ? Can I avoide that ? Is there any cheep alternative to 65xx to
> use
> MQC, I'm only thinking of ASR1000 to act as a CE devise ?
>
> It seems from the CISCO rev tool that MQC is not supported in any blades of
> the 6509. I have checked but I found not hard to believe, could you please
> let
> me know , if there is any blades that has a support of the MQC QOS style in
> the 6509
>
>
> Here Are the blades I have
>
> CTS1100 is on port fa 3/47
> Uplnk port gi 5/1 to 6509
>
>
> 1 48 48-port 10/100 RJ45 Ethernet Module WS-X6148A-45AF
> SAL1134Y39R
> 2 48 48-port 10/100 RJ45 Ethernet Module WS-X6148A-45AF
> SAL1135ZAM0
> 3 48 48-port 10/100 RJ45 Ethernet Module WS-X6148A-45AF
> SAL11370BGD
> 5 9 Supervisor Engine 32 8GE (Active) WS-SUP32-GE-3B
> SAL1136ZLPW
>
>
> dwnlnk port gi 1/10
> Uplnk port gi 5/8
> 6509
>
> 1 16 SFM-capable 16 port 1000mb GBIC WS-X6516A-GBIC
> SAL1135YZWX
> 5 9 Supervisor Engine 32 8GE (Active) WS-SUP32-GE-3B
> SAL11391WLD
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Mar 07 2012 - 08:05:50 ART