Re: No prefixes from EIGRP neighbor

It could be ISP do not redistribute the routes correctly, such as incorrect
route target on rd or something else.
 On Feb 1, 2012 3:00 PM, "DN817" <ndheeraj.ccie_at_googlemail.com> wrote:

> Hi Experts,
>
> We got an new EtherVPN (Layer 2 VPN) network and run EIGRP between all
> routers connected to this.
> For example: If R1,R2,R3,R4,R5 &R6 are 6 sites, each router is configured
> with an IP address from the subnet 192.168.251.0/24 on the
> WAN interface.
>
> If I do a show ip eigrp neighbor on router, I can see all other 5 routers
> as the neighbors.
>
> But if I do a show ip eigrp neighbor detail, it doesn't show prefix for
> certain neighbors.
> For example, if R6 advertises 3 prefixes, I can see them all on R1 but
> none on R2.
>
> Our Service Provider mentioned they can't see any fault as we have IP
> connectivity between all sites.
>
> We are using ISR G2 routers (Cisco 2951 & 1921s;
> IOS universalk9-mz.SPA.150-1.M4).
> Any help with this is much appreciated.
>
> Thanks,
> Dee
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Feb 02 2012 - 01:29:34 ART