Re: Route-map Set interface behavior

Refer to this link for understanding this policy routing behavior

http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfindp2.html#wp1020570

Regards,

2012/1/25 Kapil Atrish <kapilatrish_at_hotmail.com>

> Hi,
>
> Question:
> With the below configuration, how will traffic with source address
> 10.8.81.x
> routed? Will it use Tunnel8101 and Tunnel8201 alternatively? Or it will
> only
> use Tunnel8101 as long as it's up and if it goes down, it'll fail over to
> Tunnel8201?
>
>
> ip access-list extended VoIP_Out
> permit ip 10.8.81.0 0.0.0.255 any
> !
> route-map NTH48 permit 10
> match ip address VoIP_Out
> set interface Tunnel8101 Tunnel8201
> !
> interface GigabitEthernet0/0/1
> ip address 101.81.12.41 255.255.255.0
> ip policy route-map NTH48
> !
>
> Thanks,
> Kapil
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Jeferson Guardia
CCIE #28157
Blogs and organic groups at http://www.ccie.net