Re: RSPAN

Hi Mohammad,

Sorry I didn't get your Q. What do you mean by filtering the VLANs ?

You use ingress to instruct the switch to which VLAN incoming traffic on your fa0/2 should be put into. Without that all incoming traffic is dropped.

/Sud

Sent from my iPad

On Jan 26, 2012, at 1:57 PM, Mohammad Khalil <eng_mssk_at_hotmail.com> wrote:

> hi , if i want to monitor traffic for a specified vlan only on one switch (let us say SW1) and the remote vlan is the source on the other switch (SW2)
> should i filter the vlans in the monitor session configuration ?
> SW1
> monitor session 1 source vlan 22 rx
> monitor session 1 source vlan 66 rx
> monitor session 1 destination remote vlan 99
>
> SW2
> monitor session 1 source vlan 99
> monitor session 1 destination interface fastEthernet 0/2 (should i use ingress ? the f0/2 is not access in any vlan)
>
> Thanks
>
> BR,
> MSSK
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Jan 26 2012 - 19:15:34 ART