RE: RSPAN

i mean i am monitoring specific vlans traffic , should i apply the filter just for them ?

Thanks

> Subject: Re: RSPAN
> From: mitsuie2_at_gmail.com
> Date: Thu, 26 Jan 2012 19:15:34 +0000
> CC: ccielab_at_groupstudy.com
> To: eng_mssk_at_hotmail.com
>
> Hi Mohammad,
>
> Sorry I didn't get your Q. What do you mean by filtering the VLANs ?
>
> You use ingress to instruct the switch to which VLAN incoming traffic on your fa0/2 should be put into. Without that all incoming traffic is dropped.
>
> /Sud
>
> Sent from my iPad
>
> On Jan 26, 2012, at 1:57 PM, Mohammad Khalil <eng_mssk_at_hotmail.com> wrote:
>
> > hi , if i want to monitor traffic for a specified vlan only on one switch (let us say SW1) and the remote vlan is the source on the other switch (SW2)
> > should i filter the vlans in the monitor session configuration ?
> > SW1
> > monitor session 1 source vlan 22 rx
> > monitor session 1 source vlan 66 rx
> > monitor session 1 destination remote vlan 99
> >
> > SW2
> > monitor session 1 source vlan 99
> > monitor session 1 destination interface fastEthernet 0/2 (should i use ingress ? the f0/2 is not access in any vlan)
> >
> > Thanks
> >
> > BR,
> > MSSK
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Jan 26 2012 - 22:00:59 ART