Re: Logging Consol 7

Most probably you have mixed up the logging levels for the two commands.

Usually its done like this:

! Prevent debugging output on the console
logging console 6

! Enable debugging output to the buffer
logging buffer 7

Regards

Farrukh

On Mon, Jan 16, 2012 at 3:07 AM, WaLeEd AlShErIf <waleed_ccie_at_yahoo.com>wrote:

> Hi All,
>
> I would like to understand the command of loggign , I have seen some
> examples that used to debug the ppp negotiation where the debugger used
> command " logging consol 7 " follwed by "logging buffer 6 " then " logging
> buffer size 999999" and ends with " show log " to see the debug
> information .
>
> I know that " logging buffer size 999999 " is used to increase the buffer
> size as the debug of ppp could be infinite and if you did show it on the
> consol it can oversize the consol buffer and log you out of the router .
>
> If
> any one deals with this , hope to clarify the meaning and the details .
>
> Good
> luck for you all
> Yours,
> Waleed
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jan 16 2012 - 10:06:39 ART