Re: MPLS LABEL

> Apologies in advance for a very silly question but I am stuck so need an
> answer.
>
Dont mind but please tag the subject line as VS very silly before posting
such questions

>
> What If I a PE router configured for a label range say 200 299. I have only
> 100 label and if I have 500 routes in that network, how does this MPLS
> label work ?
>
> MPLS label is assigned to each route . I created a own lab to learn MPLS
> and I am now stuck at this. I will add some loopbacks and see how it works
> and will reduce the label range to say 20 and will add some 30 loop back
> but if someone can explain me so that I can see them in action.
>
>
> R3#show mpls forwarding-table
> Local Outgoing Prefix Bytes Label Outgoing Next Hop
> Label Label or Tunnel Id Switched interface
> 300 Pop Label 2.2.2.2/32 0 Et0/0 10.1.23.2
> 301 201 4.4.4.4/32 0 Et0/0 10.1.23.2
> 302 Pop Label 10.1.24.0/24 0 Et0/0 10.1.23.2
> 303 No Label 1.1.0.1/32[V] 0 Se1/1
> point2point
> 305 No Label 1.1.1.1/32[V] 0 Se1/1
> point2point
> 306 No Label 1.1.2.1/32[V] 0 Se1/1
> point2point
> 307 No Label 1.1.3.1/32[V] 0 Se1/1
> point2point
> 308 No Label 1.1.4.1/32[V] 0 Se1/1
> point2point
> 309 No Label 1.1.5.1/32[V] 0 Se1/1
> point2point
> 310 No Label 1.1.6.1/32[V] 0 Se1/1
> point2point
> 311 No Label 1.1.7.1/32[V] 0 Se1/1
> point2point
> 312 No Label 1.1.8.1/32[V] 0 Se1/1
> point2point
> 313 No Label 1.1.9.1/32[V] 0 Se1/1
> point2point
> 314 No Label 1.1.10.1/32[V] 0 Se1/1
> point2point
> 315 No Label 10.1.13.0/24[V] 520 aggregate/CA
> 316 No Label 192.168.1.0/24[V] \
> 0 Se1/1 point2point
>
> Thanking you kindly in advance.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Jan 15 2012 - 21:37:21 ART