RE: Force Authorization code on CME 8.6

Thank you very much for you support
But i need the feature on CME 8.6 (SRSV) not on UC500

From: barrerj1_at_hotmail.com
To: go_soon2010_at_hotmail.com; ccielab_at_groupstudy.com
Subject: RE: Force Authorization code on CME 8.6
Date: Thu, 29 Dec 2011 21:05:47 -0600

I think this may help you

Some Reference information

https://supportforums.cisco.com/docs/DOC-9795/#Can_UC500CME_be_configured_to_prompt_a_caller_for_a_PIN_before_placing_a_call

Configuration Examples for Forced Authorization Code
This section provides configuration example for Forced Authorization Code.
!
gw-accounting aaa
!
aaa new-model
!
aaa authentication login default local
aaa authentication login h323 local
aaa authorization exec h323 local
aaa authorization network h323 local
!
aaa session-id common
!
voice lpcor enable
voice lpcor custom
group 11 LocalUser
group 12 AnalogPhone
!
voice lpcor policy LocalUser
service fac
accept LocalUser fac
accept AnalogPhone fac
!
voice lpcor policy AnalogPhone
service fac
accept LocalUser fac
accept AnalogPhone fac
!
application
package auth
param passwd-prompt flash:en_bacd_welcome.au
param passwd 54321
param user-prompt flash:en_bacd_enter_dest.au
param term-digit #
param abort-digit *
param max-digits 32
!
username 786 password 0 54321
!
voice-port 0/1/0
station-id name Phone1
station-id number 1235
caller-id enable
!
voice-port 0/1/1
lpcor incoming AnalogPhone
lpcor outgoing AnalogPhone
!
dial-peer voice 11 pots
destination-pattern 99329
port 0/1/1
!
ephone-dn 102 dual-line
number 786786
label HussainFAC
!
!
ephone 102
lpcor type local
lpcor incoming LocalUser
lpcor outgoing LocalUser
device-security-mode none
mac-address 0005.9A3C.7A00
type CIPC
button 1:102
!
http://www.cisco.com/en/

From this doc

US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefac.html#wp1014133

Regards,

JBarrera

> From: go_soon2010_at_hotmail.com
> To: ccielab_at_groupstudy.com
> Subject: Force Authorization code on CME 8.6
> Date: Fri, 30 Dec 2011 04:18:06 +0300
>
> I need a Configuration Example for Forced Authorization Code on CME 8.6
>
> The configuration on the Doc is not clear at all
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefac.html#wp1011721
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Dec 30 2011 - 13:51:43 ART