Re: Force Authorization code on CME 8.6

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefac.html

On Fri, Dec 30, 2011 at 9:51 PM, Iam Here <go_soon2010_at_hotmail.com> wrote:

> Thank you very much for you support
> But i need the feature on CME 8.6 (SRSV) not on UC500
>
> From: barrerj1_at_hotmail.com
> To: go_soon2010_at_hotmail.com; ccielab_at_groupstudy.com
> Subject: RE: Force Authorization code on CME 8.6
> Date: Thu, 29 Dec 2011 21:05:47 -0600
>
>
>
>
>
>
>
> I think this may help you
>
> Some Reference information
>
>
>
>
>
>
> https://supportforums.cisco.com/docs/DOC-9795/#Can_UC500CME_be_configured_to_prompt_a_caller_for_a_PIN_before_placing_a_call
>
>
>
>
>
> Configuration Examples for Forced Authorization Code
> This section provides configuration example for Forced Authorization Code.
> !
> gw-accounting aaa
> !
> aaa new-model
> !
> aaa authentication login default local
> aaa authentication login h323 local
> aaa authorization exec h323 local
> aaa authorization network h323 local
> !
> aaa session-id common
> !
> voice lpcor enable
> voice lpcor custom
> group 11 LocalUser
> group 12 AnalogPhone
> !
> voice lpcor policy LocalUser
> service fac
> accept LocalUser fac
> accept AnalogPhone fac
> !
> voice lpcor policy AnalogPhone
> service fac
> accept LocalUser fac
> accept AnalogPhone fac
> !
> application
> package auth
> param passwd-prompt flash:en_bacd_welcome.au
> param passwd 54321
> param user-prompt flash:en_bacd_enter_dest.au
> param term-digit #
> param abort-digit *
> param max-digits 32
> !
> username 786 password 0 54321
> !
> voice-port 0/1/0
> station-id name Phone1
> station-id number 1235
> caller-id enable
> !
> voice-port 0/1/1
> lpcor incoming AnalogPhone
> lpcor outgoing AnalogPhone
> !
> dial-peer voice 11 pots
> destination-pattern 99329
> port 0/1/1
> !
> ephone-dn 102 dual-line
> number 786786
> label HussainFAC
> !
> !
> ephone 102
> lpcor type local
> lpcor incoming LocalUser
> lpcor outgoing LocalUser
> device-security-mode none
> mac-address 0005.9A3C.7A00
> type CIPC
> button 1:102
> !
> http://www.cisco.com/en/
>
>
>
> From this doc
>
> US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefac.html#wp1014133
>
>
>
>
>
> Regards,
>
>
>
> JBarrera
>
>
>
>
>
>
>
> > From: go_soon2010_at_hotmail.com
> > To: ccielab_at_groupstudy.com
> > Subject: Force Authorization code on CME 8.6
> > Date: Fri, 30 Dec 2011 04:18:06 +0300
> >
> > I need a Configuration Example for Forced Authorization Code on CME 8.6
> >
> > The configuration on the Doc is not clear at all
> >
> >
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefac.html#wp1011721
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Dec 30 2011 - 23:11:53 ART