Re: PSTN Configuration

Just by readin it states 'my PSTN Phone is not coming up...' sounds a
little off. What model is the Phone? Is it Cisco 79XX? Or PSTN? If PSTN
than all I have written holds. If Cisco you have some good suggestions.

On Sunday, October 30, 2011, Ryan West <rwest_at_zyedge.com> wrote:
> This might sound obvious, but did you change the MAC address in your
ephone 1 configuration. Also make sure you're actually getting an address,
there were DHCP issues with the default INE configs.
>
> Sent from handheld
>
> On Oct 30, 2011, at 4:32 PM, Kapil Atrish <kapilatrish_at_hotmail.com> wrote:
>
>> Can you paste you PSTN router and switch config here?
>>
>>
>> You are able to ping the ip phone from PSTN router, correct? And, you've
>> configured the Option 150 on your DHCP server or if it's static, you've
put in
>> the TFTP IP under your Phone settings?
>>
>> "debug ephone register" - Do you see a request from the phone in
question?
>>
>>
>>
>>
>>> Date: Sun, 30 Oct 2011 12:25:17 -0700
>>> From: sdiaby99_at_yahoo.com
>>> Subject: Re: PSTN Configuration
>>> To: renorider_at_gmail.com
>>> CC: ccielab_at_groupstudy.com
>>>
>>> On his PSTN simulation he is not using FXO or FXS port in fact he is
using
>>> telephone service to create ephone-dn I don't quite understand what you
>> said.
>>> I think i am missing something here
>>>
>>>
>>>
>>> ________________________________
>>> From:
>>> marc edwards <renorider_at_gmail.com>
>>> To: suley diaby <sdiaby99_at_yahoo.com>
>>> Cc:
>>> "ccielab_at_groupstudy.com" <ccielab_at_groupstudy.com>
>>> Sent: Sunday, October 30,
>>> 2011 2:22 PM
>>> Subject: Re: PSTN Configuration
>>>
>>>
>>> Make that FXO from DMARC and
>>> FXS out to phone.
>>>
>>> On Sunday, October 30, 2011, marc edwards
>>> <renorider_at_gmail.com> wrote:
>>>> PSTN requires FXO interface. Only VoIP or soft
>>> phone will work on switch
>>>>
>>>> On Sunday, October 30, 2011, suley diaby
>>> <sdiaby99_at_yahoo.com> wrote:
>>>>> Hello,
>>>>> I set up my voice lab and I am using
>>> the PSTN configuration provided by
>>>>> Petr Lapukhov.
>>>>> With the same
>>> configuration and topology setup my PSTN phone is
>>>>> not coming up.
>>>>> I am
>>> using a physical phone not a soft phone. My phone is
>>>>> connected to a 3750
>>> POE switch.
>>>>> Do I need to create fake Voice and Data vlan
>>>>> on the switch
>>> and then create dot1q on the router
>>>>> to make it work? Their setup
>>>>> doesn't
>>> mention anything about their phone connection.
>>>>> The reason I said fake
>>>>>
>>> vlans there are vlans for HQ, BR1 and BR2.
>>>>> Can I use one of those if I need
>>>>> to create a vlan or I don't need to? Any help with this ?
>>>>> Thanks,
>>>>>
>>>>>
>>> SD
>>>>>
>>>>>
>>>>> Blogs and organic groups at http://www.ccie.net
>>>>>
>>>>>
>>> _______________________________________________________________________
>>>>>
>>> Subscription information may be found at:
>>>>>
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> ____________________________________________________________

Blogs and organic groups at http://www.ccie.net
Received on Sun Oct 30 2011 - 18:44:54 ART