Re: PSTN Configuration

This might sound obvious, but did you change the MAC address in your ephone 1 configuration. Also make sure you're actually getting an address, there were DHCP issues with the default INE configs.

Sent from handheld

On Oct 30, 2011, at 4:32 PM, Kapil Atrish <kapilatrish_at_hotmail.com> wrote:

> Can you paste you PSTN router and switch config here?
>
>
> You are able to ping the ip phone from PSTN router, correct? And, you've
> configured the Option 150 on your DHCP server or if it's static, you've put in
> the TFTP IP under your Phone settings?
>
> "debug ephone register" - Do you see a request from the phone in question?
>
>
>
>
>> Date: Sun, 30 Oct 2011 12:25:17 -0700
>> From: sdiaby99_at_yahoo.com
>> Subject: Re: PSTN Configuration
>> To: renorider_at_gmail.com
>> CC: ccielab_at_groupstudy.com
>>
>> On his PSTN simulation he is not using FXO or FXS port in fact he is using
>> telephone service to create ephone-dn I don't quite understand what you
> said.
>> I think i am missing something here
>>
>>
>>
>> ________________________________
>> From:
>> marc edwards <renorider_at_gmail.com>
>> To: suley diaby <sdiaby99_at_yahoo.com>
>> Cc:
>> "ccielab_at_groupstudy.com" <ccielab_at_groupstudy.com>
>> Sent: Sunday, October 30,
>> 2011 2:22 PM
>> Subject: Re: PSTN Configuration
>>
>>
>> Make that FXO from DMARC and
>> FXS out to phone.
>>
>> On Sunday, October 30, 2011, marc edwards
>> <renorider_at_gmail.com> wrote:
>>> PSTN requires FXO interface. Only VoIP or soft
>> phone will work on switch
>>>
>>> On Sunday, October 30, 2011, suley diaby
>> <sdiaby99_at_yahoo.com> wrote:
>>>> Hello,
>>>> I set up my voice lab and I am using
>> the PSTN configuration provided by
>>>> Petr Lapukhov.
>>>> With the same
>> configuration and topology setup my PSTN phone is
>>>> not coming up.
>>>> I am
>> using a physical phone not a soft phone. My phone is
>>>> connected to a 3750
>> POE switch.
>>>> Do I need to create fake Voice and Data vlan
>>>> on the switch
>> and then create dot1q on the router
>>>> to make it work? Their setup
>>>> doesn't
>> mention anything about their phone connection.
>>>> The reason I said fake
>>>>
>> vlans there are vlans for HQ, BR1 and BR2.
>>>> Can I use one of those if I need
>>>> to create a vlan or I don't need to? Any help with this ?
>>>> Thanks,
>>>>
>>>>
>> SD
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>>
>> _______________________________________________________________________
>>>>
>> Subscription information may be found at:
>>>>
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Oct 30 2011 - 21:26:01 ART