Re: PSTN Configuration

On his PSTN simulation he is not using FXO or FXS port in fact he is using
telephone service to create ephone-dn I don't quite understand what you said.
I think i am missing something here

________________________________
From:
marc edwards <renorider_at_gmail.com>
To: suley diaby <sdiaby99_at_yahoo.com>
Cc:
"ccielab_at_groupstudy.com" <ccielab_at_groupstudy.com>
Sent: Sunday, October 30,
2011 2:22 PM
Subject: Re: PSTN Configuration

Make that FXO from DMARC and
FXS out to phone.

On Sunday, October 30, 2011, marc edwards
<renorider_at_gmail.com> wrote:
> PSTN requires FXO interface. Only VoIP or soft
phone will work on switch
>
> On Sunday, October 30, 2011, suley diaby
<sdiaby99_at_yahoo.com> wrote:
>> Hello,
>> I set up my voice lab and I am using
the PSTN configuration provided by
>> Petr Lapukhov.
>> With the same
configuration and topology setup my PSTN phone is
>> not coming up.
>> I am
using a physical phone not a soft phone. My phone is
>> connected to a 3750
POE switch.
>> Do I need to create fake Voice and Data vlan
>> on the switch
and then create dot1q on the router
>> to make it work? Their setup
>> doesn't
mention anything about their phone connection.
>> The reason I said fake
>>
vlans there are vlans for HQ, BR1 and BR2.
>> Can I use one of those if I need
>> to create a vlan or I don't need to? Any help with this ?
>> Thanks,
>>
>>
SD
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>>
Received on Sun Oct 30 2011 - 12:25:17 ART