Re: xmodem or interface config command in very old rommon

Try this:

RXBoot:
http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800941aa.shtml

On Mon, Oct 17, 2011 at 11:45 AM, NAKAMURA Atsuhiro <
a-naka_at_mtf.biglobe.ne.jp> wrote:

> Dear experts,
>
> Does anybody has an idea,
>
> - What is the xmodem file transfer command in very old rommon?
>
> Or,
>
> - How to configure IP address of Ethernet interface in very old rommon?
>
> Now I have a classic 2509-RJ with IOS 11.2(16), but it doesn't recognize
> its interface properly.
> I guess the IOS image c2500-c-l_112-16 doesn't match the hardware.
> So I want to try IOS upgrade to c2500-is-l.112-18.bin.
>
> -------
> Router#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-C-L), Version 11.2(16), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-1998 by cisco Systems, Inc.
> Compiled Tue 06-Oct-98 11:59 by ashah
> Image text-base: 0x03023730, data-base: 0x00001000
>
> ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE
> SOFTWARE (fc1)
> BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1,
> PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
>
> Router uptime is 44 minutes
> System restarted by reload at 09:29:15 SGT Fri Oct 14 2011
> System image file is "flash:c2500-c-l_112-16", booted via flash
>
> cisco 2500 (68030) processor (revision I) with 2048K/2048K bytes of memory.
> Processor board ID 08309343, with hardware revision 00000000
> Bridging software.
> SuperLAT software copyright 1990 by Meridian Technology Corp).
> TN3270 Emulation software.
> X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read ONLY)
>
> Configuration register is 0x2102
>
> -------
> >?
> $ Toggle cache state
> B [filename] [TFTP Server IP address | TFTP Server Name]
> Load and execute system image from ROM or from TFTP server
> C [address] Continue execution [optional address]
> D /S M L V Deposit value V of size S into location L with modifier M
> E /S M L Examine location L with size S with modifier M
> G [address] Begin execution
> H Help for commands
> I Initialize
> K Stack trace
> L [filename] [TFTP Server IP address | TFTP Server Name]
> Load system image from ROM or from TFTP server, but do not
> begin execution
> O Show configuration register option settings
> P Set the break point
> S Single step next instruction
> T function Test device (? for help)
>
> Deposit and Examine sizes may be B (byte), L (long) or S (short).
> Modifiers may be R (register) or S (byte swap).
> Register names are: D0-D7, A0-A6, SS, US, SR, and PC
> >
> -------
>
> Best regards,
>
> Achi
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Oct 17 2011 - 13:33:51 ART