Re: BGP neighborship problem

R1(config)#do sh debug
IP routing:
  BGP debugging is on for address family: IPv4 Unicast

R1(config)#
*Mar 1 01:57:08.247: BGP: 2.2.2.2 active open failed - no route to
peer, open active delayed 29174ms (35000ms max, 28% jitter)

R1(config)#do sh ip route 2.2.2.2
% Network not in table

--
Garry L. Baker
"With sufficient thrust, pigs fly just fine..." - RFC 1925
On Sat, Oct 15, 2011 at 7:08 PM, CCIE KID <eliteccie_at_gmail.com> wrote:
> Hi fellas,
>
> I have a simple topology R1----------------------------R2        R1 is
> forming neighbourship with R2's loopback  and viceversa. I have a default
> route configured to reach loopback.
> Why BGP cant form a neighbourship  with a peer with a default route? Why it
> needs a unicast exact route to form a peer?
> What is the logic behind this ? Can anyone explain me the logic?
>
> --
> With Warmest Regards,
>
> CCIE KID
> CCIE#29992 (Security)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net