Re: 3550 Question

ILP = Inline Power

It can be disabled-
Power online never

However, I don't see that you can do that with your switch state. I'm not sure as to it's repairability.

Regards,
Jay McMickle- CCNP,CCSP,CCDP
Sent from my iPhone
http://mycciepursuit.wordpress.com

On Sep 15, 2011, at 12:32 PM, Stephen Robinson <stever-gs_at_qtzl.com> wrote:

> 3550 question.
>
> I'm having a problem with my 3550 (second one with the same problem)
>
> During POST ILP controller test fails and then the switch does not work.
>
> In the log (pasted below) I see a warning at the bottom
>
> !!! WARNING: The switch is not usable !!!
>
> Questions are:
> 1. what is ILP?
> 2. is this repairable?
>
> Thanks,
> Below is the pasted log.
>
> Steve
>
>
>
>
> POST: ILP Controller Tests : Begin
> POST: ILP Controller Tests : End, Status Failed
> INIT: failed ILP accessing test
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing Cisco cryptographic products may be found
> at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> If you require further assistance please contact us by sending email to
> export_at_cisco.com.
>
> Cisco WS-C3550-24-PWR (PowerPC) processor (revision D0) with 65526K/8192K
> bytes
> of memory.
> Processor board ID CAT0719X0VD
> Last reset from warm-reset
> Running Layer2/3 Switching Image
>
> Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces
>
> Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces
>
> Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface
>
> Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface
>
> 24 FastEthernet interfaces
> 2 Gigabit Ethernet interfaces
>
> The password-recovery mechanism is enabled.
> 384K bytes of flash-simulated NVRAM.
> Base ethernet MAC Address: 00:0D:28:31:7C:80
> Motherboard assembly number: 73-8100-07
> Power supply part number: 341-0029-02
> Motherboard serial number: CAT07180B67
> Power supply serial number: DTH07150M8V
> Model revision number: D0
> Motherboard revision number: A0
> Model number: WS-C3550-24PWR-SMI
> System serial number: CAT0719X0VD
>
> !!! WARNING: The switch is not usable !!!
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Sep 15 2011 - 13:42:09 ART