Re: OT:Racked Moved to Garage no access yet

I have wireless in the house already, but router/AP is in my office
upstairs. I was looking at a outlet bridge extender and plug that into my
linksys 8 port switch where my APC power and UPS are already plugged in.

May be the cheapest solution.

On Thu, Sep 8, 2011 at 11:04 AM, Haroon <itguy.pro_at_gmail.com> wrote:

> Hi Dennis,
>
> I assume you have wireless in your setup already? Wifi will be the easiest
> way to extend the lab to your garage... using wireless access point or even
> wireless router (you can get these pretty cheap from craiglist). You will
> need to configure ethernet interface on 2511 and should be able to telnet
> in.
>
> I've been trying to do the same with my lab but it gets really hot down
> here in summer time and i dont think it would be good idea to torture my
> equipment like that!
>
> On Thu, Sep 8, 2011 at 1:45 PM, Dennis Worth <dennis.worth_at_gmail.com>wrote:
>
>> Group,
>>
>> I currently moved and put my rack in the garage. No physical network
>> cabling
>> out there. Anyone got an idea about doing a wireless connection direct to
>> 2511AS or maybe off a small switch/hub? Maybe even a wireless extender
>> with
>> a ethernet port?
>>
>> any ideas are welcome.
>>
>> Thanks,
>>
>> --
>> Dennis Worth
>>
>> "Of all men's miseries the bitterest it this: to know so much and to have
>> control over nothing."
>> --Herodotus
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>

-- 
Dennis Worth
"Of all men's miseries the bitterest it this: to know so much and to have
control over nothing."
--Herodotus
Blogs and organic groups at http://www.ccie.net