Re: OT:Racked Moved to Garage no access yet

as an option you may want to check Ethernet over power lines

A.

On 9/9/2011 4:40 AM, Dennis Worth wrote:
> I have wireless in the house already, but router/AP is in my office
> upstairs. I was looking at a outlet bridge extender and plug that into my
> linksys 8 port switch where my APC power and UPS are already plugged in.
>
> May be the cheapest solution.
>
> On Thu, Sep 8, 2011 at 11:04 AM, Haroon<itguy.pro_at_gmail.com> wrote:
>
>> Hi Dennis,
>>
>> I assume you have wireless in your setup already? Wifi will be the easiest
>> way to extend the lab to your garage... using wireless access point or even
>> wireless router (you can get these pretty cheap from craiglist). You will
>> need to configure ethernet interface on 2511 and should be able to telnet
>> in.
>>
>> I've been trying to do the same with my lab but it gets really hot down
>> here in summer time and i dont think it would be good idea to torture my
>> equipment like that!
>>
>> On Thu, Sep 8, 2011 at 1:45 PM, Dennis Worth<dennis.worth_at_gmail.com>wrote:
>>
>>> Group,
>>>
>>> I currently moved and put my rack in the garage. No physical network
>>> cabling
>>> out there. Anyone got an idea about doing a wireless connection direct to
>>> 2511AS or maybe off a small switch/hub? Maybe even a wireless extender
>>> with
>>> a ethernet port?
>>>
>>> any ideas are welcome.
>>>
>>> Thanks,
>>>
>>> --
>>> Dennis Worth
>>>
>>> "Of all men's miseries the bitterest it this: to know so much and to have
>>> control over nothing."
>>> --Herodotus
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Sep 09 2011 - 06:49:22 ART