Re: Hanging Terminal Server Ports

hi joe,

could be memory problem? bad/loose cable.

try mem and cable from bad on good one to see if that is the problem.
On Sep 7, 2011 10:41 PM, "Joe Astorino" <joeastorino1982_at_gmail.com> wrote:
> Hey guys,
>
> Has anybody here experienced a situation where an access server constantly
> "hangs" sessions and you have to go clear the lines ALL the time? I have a
> few AS' at the moment and it seems like I have to constantly go clear the
> lines for no apparent reason. I will be in a session, and it will just
stop
> responding completely, so I close the telnet connection to it. When you
try
> again the line is in use and needs cleared. I don't have the problem on
> other 2509's I have configured with the same configuration
>
> This is happening on a 2509 and a 3640 with AS module. I have tried the
> following
>
> 1) I am 110% sure I have "no exec" on all the lines
> 2) I have tried configuring tcp keepalives on the AS as a long shot
>
> Here is the configuration of the 2509 -- nothing magical here I just
thought
> I would ask in case somebody sees something I am missing
>
> line 1 8
> no exec
> transport input telnet
>
> Thanks!
>
>
> --
> Regards,
>
> Joe Astorino
> CCIE #24347
> Blog: http://astorinonetworks.com
>
> "He not busy being born is busy dying" - Dylan
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Sep 07 2011 - 22:54:32 ART