Re: Lab configuration script and service config

Not sure you grasp what write memory is. It will take literally a couple of seconds and same your config changes to the startup config. Not sure where xmodem comes into this

CCIE # 23962 (SP)

Sent from my iPhone 4

On 23 Aug 2011, at 12:11 PM, Carlos G Mendioroz <tron_at_huapi.ba.ar> wrote:

> That is way too costly on a 2811, 5 minutes!
> What I saw yesterday is "service config" in the running config
> some 2 minutes after the script put a "no service config" in
> there. Nuts.
>
> I guess I'm changing the approach, I will be writing to the startup
> config and then reload with the final config in. I dropped that
> because 2800s do not support copy from xmodem to startup, but
> I will be writing to flash and then copy from flash to startup.
>
> -Carlos
>
> Aaron Riemer @ 23/08/2011 01:06 -0300 dixit:
>> Hi Carlos,
>> I believe you need to write memory and reload for the messages to go away.
>> Cheers,
>> -Aaron.
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Carlos G Mendioroz
>> Sent: Tuesday, 23 August 2011 4:10 AM
>> To: Cisco certification
>> Subject: Lab configuration script and service config
>> Hi,
>> has anybody seen "service config" reappearing by itself ?
>> I'm trying to solve an issue where a script that is applying
>> configuration to a router gets confused because of interleaved
>> "%Error opening tftp://255.255.255.255/HQ-2-confg (Timed out)"
>> messages.
>> I'm doing "no service config" and "no logging console" right away,
>> but the messages keep showing up.
>> Any clues ?
>> -Carlos
>
> --
> Carlos G Mendioroz <tron_at_huapi.ba.ar> LW7 EQI Argentina
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Aug 23 2011 - 18:58:53 ART