Clock Rate

Dear
 
I want to know what clock rate i will use when i am in the lab or when i am
 using
 dynamips what is the method or way i will configure the correct clock rate to
 my routers
 
Eg
 
For DCE i ll configure the clock rate not for DTE correct
 
if both devices are DCE i will define CR on both or in a single devices.
 
R1 --ser1/0 -------------------s1/0 R2
 
I am facing problem my ospf adj flap after few minutes is CR are the reason
 
R1 = s1/0 ip add 10.1.1.1/24 and loop back 1.1.1.1/24
 R2 = s1/0 ip add 10.1.1.2/24 and loop back 2.1.1.1/24
 clock rate 64000 on both sides
 R1 and R2
 
router ospf 1
 net 0.0.0.0 255.255.255.255 are 0
 
thks

Blogs and organic groups at http://www.ccie.net
Received on Sat Jul 16 2011 - 12:06:16 ART