Re: Query for IPv6 autoconfig

Hi Sunil,

The RA is suppressed by default under tunnel interfaces you only need to
config
no ipv6 nd ra suppress under tu1001 on 2002::1/64 router.

best regards,

Alberto

On 6 July 2011 15:24, Sunil pareek <skpareek84_at_gmail.com> wrote:

> Hi
>
> I was just learning the autoconfig feature in ipv6. I had checked this by
> configuring a IPv6 add on one side and then other side automatically takes
> the ipv6 add by the relevent cong.I also checked with multiple prefixes
> with
> ipv6 nd command on ipv6 router.
>
> but while checking this feauter on the Tunnel interface it is not wroking.I
> am testing it with a simple gre tunnel.Here is my config.:
>
> int Tu1001
> ipv6 add 2002::1/64
> tunnel source 4.4.4.4
> tunnel destination 5.5.5.5
>
>
> on other side
> int tu1001
> ipv6 add autoconfig
> tunnel soure 5.5.5.5
> tunnel destination 4.4.4.4
>
> what I want is other side should take the ip by autoconfig but this is not
> working on tunnel interface.Please help me on this and I am sorry if the
> question is having any relevence or not.I had also checked with that ipv6
> nd
> command on the tunnel interface but still it is not working.
>
> Regards
> Sunil
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
*
*
Blogs and organic groups at http://www.ccie.net