Re: EEM---Config

You mean that there is similar question in the real lab? Are you sure?
How do you know ?

Anyway, if I have to type all this config to get only 3 points I
rather pass EEM all together... Thanks for the hint,
LOL

On Sun, Jun 26, 2011 at 2:41 PM, ccieguy <jbccie_at_gmail.com> wrote:
> http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6555/ps6815/config_guide_eem_configuration_for_cisco_integrated_services_router_platforms.html
>
> A sample EEM script follows:
> ::cisco::eem::event_register_none Event Register Keyword
> # Namespace imports
> namespace import :: isco::eem::* Namespace Import
> namespace import :: isco::lib::*
> # Local procedure for CLI interface
> # Pass a list of cli commands and it returns a list of outputs
> #
> proc CLICmdProc {cmds} {
> if [catch {cli_open} result] {
> error $result $errorInfo
> } else {
> array set cli1 $result
> }
> if [catch {cli_exec $cli1(fd) "enable"} result] {
> error $result $errorInfo
> }
> if [catch {cli_exec $cli1(fd) "term len 0"} result] {
> error $result $errorInfo
> }
> foreach a_cmd $cmds {
> if [catch {cli_exec $cli1(fd) $a_cmd} result] { Body
> error $result $errorInfo
> } else {
> lappend cmd_output $result
> }
> }
> if [catch {cli_close $cli1(fd) $cli1(tty_id)} result] {
> error $result $errorInfo
> }
> return $cmd_output
> }
> #
> # Put commands here
> #
> # enhancement - read them from a file
> #
> lappend clicmd "show ip int brief"
> lappend clicmd "show tech"
> lappend clicmd "show clock"
> #
> set cliout [CLICmdProc $clicmd]
> #
> # write to a file
> #
> #
> if [file exists $_ofilename] {
> puts "file $_ofilename being overwritten"
> }
> set myfileid [open $_ofilename w+]
> foreach outs $cliout {
> puts $myfileid $outs
> }
> close $myfileid
>
>
> http://forums.cisco.com/eforum/servlet/EEM?page=main
>
>
>
> Send email applet:
>
> http://forums.cisco.com/eforum/servlet/EEM?page=eem&fn=script&scriptId=921
> http://forums.cisco.com/eforum/servlet/EEM?page=eem&fn=script&scriptId=921
>
> Command repeat applet:
>
> http://forums.cisco.com/eforum/servlet/EEM?page=eem&fn=script&scriptId=381
>
> Multiple pipes:
>
> http://forums.cisco.com/eforum/servlet/EEM?page=eem&fn=script&scriptId=2447
>
> Sort by column:
>
> http://forums.cisco.com/eforum/servlet/EEM?page=eem&fn=script&scriptId=2427
>
> Caveat:
>
> Triggers/Symptoms
>
> CPU, Memory, or buffer resource diagnostics are all triggered by
> crossing of user settable usage thresholds. Service Diagnostic scripts
> in this area use two embedded IOS features - ERM and EEM. The scripts
> dynamically generate an EEM policy that uses an ERM event detector in
> the area to be monitored.
> Actions/Outputs
>
> The actions/outputs of these policies are limited to reporting the
> threshold crossings. The value-add (over using ERM directly) is the
> email notification capability, as well as providing a wrapper for
> quickly configuring ERM (which is fairly complex). A typical message
> follows:
> *Feb 25 16:44:25.235: %HA_EM-6-LOG: tmpsys:/eem_policy/sdiag_Exec.tcl:
> THE SERVICE DIAGNOSTIC MESSAGE FOR RESOURCE CPU MONITORING IS :
> Process Exec with PID 227 exceeded the configured CPU utilization threshold 20
>
>
> monitoring CPU
> resource policy
> user global HighGlobalCPU
> policy HighGlobalCPU global
> system
> cpu total
> critical rising 5 falling 2 interval 10
> cpu process
> critical rising 5 falling 2 interval 10
>
> event manager applet ReportHighCPU
> event resource policy "HighGlobalCPU"
> action 1.0 syslog priority debugging msg "finally..."
>
>
> event manager applet snmpcpuge75
>
> event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.3.1 get-type exact
> entry-op ge entry-val 75
> poll-interval 10
>
> action 1.0 cli command "enable"
>
> action 2.0 cli command "show process cpu"
>
> action 3.0 mail server "192.168.1.146" to "engineer_at_cisco.com" from
> "devtest_at_cisco.com"
> subject "B25 PBX Alert" body "$_cli_result"
>
>
> cisco.com/go/beyond
>
>
>
> On Sun, Jun 26, 2011 at 3:57 AM, Sunil pareek <skpareek84_at_gmail.com> wrote:
>> Hi
>>
>> Thanks for the response.platform is cisco 7200 with 12.4(24)T4 ios.But can
>> you tell me what is the exact diff. b/w version 1 and rest of the version
>> ofcourse in brief or suggest any link.
>>
>>
>> It will be helpful if you can help with any config template.
>>
>> Regards
>> Sunil
>> On Sat, Jun 25, 2011 at 5:31 PM, Brad Edgeworth <edgie512_at_gmail.com> wrote:
>>
>>> Which platform are you on? some platforms only support EEM 1.0
>>>
>>> On Jun 25, 2011 5:52 AM, "Sunil pareek" <skpareek84_at_gmail.com> wrote:
>>> > Hi
>>> >
>>> > I am working with EEM these days.One of the requirement from the mgmt
>>> says
>>> > that email to should be triggered whenever the router CPU utilization
>>> goes
>>> > above 70% for the interval of 5 mins.mail should be sent to lets say
>>> > abc_at_abc.net with having a list of top processes list which are causing
>>> cpu
>>> > utilization for example top 5 or 10.
>>> >
>>> > I came to know that this can be done with EEM.can someone please help me
>>> > with the suitable config or link.And also is it recommended to like this
>>> in
>>> > Service provider network.
>>> >
>>> >
>>> > Regards
>>> > Sunil
>>> >
>>> >
>>> > Blogs and organic groups at http://www.ccie.net
>>> >
>>> > _______________________________________________________________________
>>> > Subscription information may be found at:
>>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Jun 29 2011 - 15:31:10 ART