Re: 2511 ACCESS SERVER

hostname Access-Server
!
!!
enable secret YourPassword
!
no ip domain lookup
ip host R1 2033 1.1.1.1
ip host SW1 2042 1.1.1.1
ip host R2 2034 1.1.1.1
ip host BB1 2039 1.1.1.1
ip host BB2 2040 1.1.1.1
ip host BB3 2041 1.1.1.1
ip host SW2 2043 1.1.1.1
ip host SW3 2044 1.1.1.1
ip host SW4 2045 1.1.1.1
ip host R3 2035 1.1.1.1
ip host Frame 2046 1.1.1.1
ip host R4 2036 1.1.1.1
ip host R6 2038 1.1.1.1
ip host R5 2037 1.1.1.1
!
!
username Admin password 0 Admin
username U123 privilege 2 password 0 U123
!
interface Loopback0
 ip address 1.1.1.1 255.0.0.0
!
interface F0/0
ip address (IP address that you got from your provider)
!
ip route 0.0.0.0 0.0.0.0 (Next-hop IP address)
!
!
!
!
privilege exec level 2 send
privilege exec level 2 clear line
privilege exec level 2 clear
!
line con 0
 logging synchronous
line 33 46
 no exec
 transport input all
line 47 48
line aux 0
line vty 0 4
 exec-timeout 0 0
 login local
 transport input all
line vty 5 181
 exec-timeout 0 0
 login local
 transport input all
!
!
end

I hope this helps.
On Wed, Jun 15, 2011 at 7:28 PM, marc edwards <renorider_at_gmail.com> wrote:

> I attempted to build an access server with this 10+ year old device and
> found it much easier and worth my time to pick up a cyclades on eBay for
> under $100. Very little configuration to get these running and simple web
> interface to adjust settings.
> On Jun 15, 2011 4:09 PM, "ACHAL GUPTA" <achalguptaag_at_gmail.com> wrote:
> > Hello Experts,
> >
> > Can anyone tell me how can i make my 2511 roter as a access server?
> >
> > i tried with following config but not working.
> >
> > I gave the ip address to ethernet (172.16.1.2) and its pinging my Laptop
> ip
> > address.
> >
> > i attach my octal cable also with no.1 cable in R1 and no.2 cable in
> > R2.........
> >
> > ip host R1 2001 172.16.1.2
> > ip host R2 2002 172.16.1.2
> > - - - - - -
> > - - - - - -
> >
> > line con 0
> > line 1 16
> > exec-timeout 0 0
> > no exec
> > transport input all
> > line vty 0 4
> > password cisco
> > login
> >
> >
> > i did that config but it is not working
> >
> > pls tell me ehat i m doing wrong and what else i will have to do?
> >
> > --
> > *Thanks,*
> > *Achal*
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
*Narbik Kocharians
*CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining.com <http://www.micronicstraining.com/>
Sr. Technical Instructor
*Ask about our FREE Lab Voucher with our Boot Camps*
YES! We take Cisco Learning Credits!
Training & Remote Racks available
Blogs and organic groups at http://www.ccie.net