Re: 2511 ACCESS SERVER

ip host R6 2007 1.1.1.1
ip host R5 2006 1.1.1.1
ip host R1 2002 1.1.1.1
ip host SW4 2011 1.1.1.1
ip host SW3 2010 1.1.1.1
ip host SW2 2009 1.1.1.1
ip host R4 2005 1.1.1.1
ip host R3 2004 1.1.1.1
ip host R2 2003 1.1.1.1
ip host SW1 2008 1.1.1.1
ip host BB3 2014 1.1.1.1
ip host BB2 2013 1.1.1.1
ip host BB1 2001 1.1.1.1
!
!
!
!
!
interface Loopback0
 ip address 1.1.1.1 255.255.255.255

ip host (Router Name) 2001 (port on octal cable) 1.1.1.1 (Loopback for
reverse telnet session)

line 1 16
 no exec
 transport input all <- Allow's all your lines to use any transport

On Wed, Jun 15, 2011 at 4:08 PM, ACHAL GUPTA <achalguptaag_at_gmail.com> wrote:

> Hello Experts,
>
> Can anyone tell me how can i make my 2511 roter as a access server?
>
> i tried with following config but not working.
>
> I gave the ip address to ethernet (172.16.1.2) and its pinging my Laptop ip
> address.
>
> i attach my octal cable also with no.1 cable in R1 and no.2 cable in
> R2.........
>
> ip host R1 2001 172.16.1.2
> ip host R2 2002 172.16.1.2
> - - - - - -
> - - - - - -
>
> line con 0
> line 1 16
> exec-timeout 0 0
> no exec
> transport input all
> line vty 0 4
> password cisco
> login
>
>
> i did that config but it is not working
>
> pls tell me ehat i m doing wrong and what else i will have to do?
>
> --
> *Thanks,*
> *Achal*
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Jun 15 2011 - 16:42:14 ART