Re: Unable to bring the LDP neigborship

if you have Loopback in your routers, LDP will try to establish the TCP
session using the Loopbacks, so make sure loopbacks are reachable using your
IGP.

www.initialdraft.com

On Tue, May 3, 2011 at 11:20 AM, Byron Chen <byronschen_at_googlemail.com>wrote:

> Hi Naufal,
>
> Without asking for more information about your configs, I would try hard
> coding the speed and duplex and
> using an IGP. Check that CEF is enabled and that you have turned on MPLS
> routing.
>
> Byron
>
> On 29 April 2011 17:20, Naufal Jamal <naufalccie_at_yahoo.in> wrote:
>
> > Hi ,
> >
> > I am trying this in GNS3 with 3745 . I dont know why the LDP neigborship
> is
> > not coming up between R1 and R2
> >
> > R1 config
> > interface FastEthernet0/1
> > ip address 3.3.3.2 255.255.255.0
> > duplex auto
> > speed auto
> > mpls label protocol ldp
> > mpls ip
> > end
> >
> > mpls label protocol ldp
> > mpls ldp discovery hello interval 2
> >
> > R2 Config
> > mpls label protocol ldp
> > mpls ldp discovery hello interval 2
> >
> > interface FastEthernet0/0
> > ip address 3.3.3.1 255.255.255.0
> > duplex auto
> > speed auto
> > mpls label protocol ldp
> > mpls ip
> >
> > Ibgp running between them is up and running.
> >
> > Can anyone suggest?
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue May 03 2011 - 17:38:01 ART