RE: using distance command in eigrp for eigrp external routes

Narbik,
Can he still explore PBR with route map in conjunction with ACL and set
the next hop address to the preferred path or paths. Any thought?

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Narbik Kocharians
Sent: Monday, April 04, 2011 4:16 AM
To: alexeim73_at_gmail.com
Cc: me you; dls152_at_cox.net; ccielab_at_groupstudy.com
Subject: Re: using distance command in eigrp for eigrp external routes

But that affects all internal or all external, but he wanted a specific
route to be affected. I guess if that is the ONLY external route, yes,
but
how about future routes?

On Mon, Apr 4, 2011 at 1:12 AM, Alexei Monastyrnyi
<alexeim73_at_gmail.com>wrote:

> how about "distance eigrp XX YY" one under the EIGRP router process
> configuration? One can specify AD for both internal and external
routes.
> Only that would affect both external paths on the same router.
>
> A.
>
> On 4/4/2011 8:06 AM, me you wrote:
>
> You can only change the AD on internal EIGRP routes. You should be
able to
> change the metric with a route map and prefix list to make one route a
> better choice.
>
> On Mon, Apr 4, 2011 at 1:27 AM, Narbik Kocharians <narbikk_at_gmail.com>
<narbikk_at_gmail.com> wrote:
>
>
> HAve you tried PBR?
>
> On Sun, Apr 3, 2011 at 12:31 PM, <dls152_at_cox.net> <dls152_at_cox.net>
wrote:
>
>
> Hello,
>
> I am trying to change the administrative distance for eigrp external
>
> routes
>
> from one source. I have router with two paths learning the same eigrp
> external routes. I am trying to change the ad for eigrp external
routes
> coming from one source. I am trying to get the router to use one path
>
> over
>
> the other unless the primary path fails?
>
> distance command is only affecting eigrp internal routes.
>
> Any suggestions?
>
> Thx!
>
>
> Blogs and organic groups at http://www.ccie.net
>
>
Received on Tue Apr 12 2011 - 09:03:24 ART