Re: INE Volume I workbook Lab 4.1

Hi,

There seems to be a cabling mismatch in your topology. Per the INE topology
specification for VOL1, R6 uses port Fa 0/0 connecting to SW2 as a trunk
bridging VLANs 67 and 146; SW2 port Fa0/6 is set up as trunk, accordingly.
This is how it is configured in the stock initial configs and the
automatically loaded configs as well.

HTH,

-- 
Petr Lapukhov, petr_at_INE.com
CCIE #16379 (R&S/Security/SP/Voice)
CCDE #20100007
Internetwork Expert, Inc.
http://www.INE.com <http://www.ine.com/>
Toll Free: 877-224-8987
Outside US: 775-826-4344
2011/3/22 2beone <2beone_at_gmail.com>
> For those going through the INE Volume 1 workbook the following may
> spare some aggravation.
>
> The RIP initial configuration is missing the following on SW4
>
> int f0/6
> switchport trunk encap dot
> switchport mode trunk
> switchport noneg
> switchport trunk allowed vlan 67,146
>
> In task 4.1 bullet 3 it is stated that R6 should be learning
> RIP routes from BB1. This is indeed the case but without the
> trunk port configuration on SW4, R6 would not be able to give
> or receive any routes from or to the rest of the network..
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net