Re: Ipv6 stateless autoconfig

I was just looking at cisco.com, thanks Anthony

Aaron

On Mar 22, 2011, at 12:59 PM, "Anthony Sequeira" <terry.francona_at_gmail.com> wrote:

> Oh yes indeed. Here is your Configuration Guide for that:
>
> http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp_ps6441
> _TSD_Products_Configuration_Guide_Chapter.html#wp1080090
>
> -----Original Message-----
> From: Aaron [mailto:aaron1_at_gvtc.com]
> Sent: Tuesday, March 22, 2011 1:44 PM
> To: Anthony Sequeira
> Cc: Ccielab_at_groupstudy.com
> Subject: Re: Ipv6 stateless autoconfig
>
> Thanks Anthony, I wonder if I can run stateless dhcpv6 server in IOS?
>
> Aaron
>
> On Mar 22, 2011, at 12:40 PM, "Anthony Sequeira" <terry.francona_at_gmail.com>
> wrote:
>
>> You can lean on Stateless DHCP for IPv6 as described in
>> http://www.ietf.org/rfc/rfc3736.txt
>>
>> Anthony Sequeira, CCIE, CCSI
>> StormWind's Epic Live
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
>> Of Aaron
>> Sent: Tuesday, March 22, 2011 12:42 PM
>> To: Ccielab_at_groupstudy.com
>> Subject: Ipv6 stateless autoconfig
>>
>> Stateless autoconfig of assigning v6 addresses to end hosts (windows
>> PC,
>> etc) seems cool. But how do I statelessly autoconfig that same
>> windows PC with a valid v6 dns? Is that possible?
>>
>> Aaron
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> ______________________________________________________________________
>> _ Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Mar 22 2011 - 13:00:47 ART